Categories
  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP

Rako RAPIR Motion detector

A ceiling mount PIR motion detector with a 360o sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required. 

MOVEMENT CONTROL

The RAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with a timeout of 5 minutes. When configured with the RASOFT programming software, it is possible to select which scene is activated and modify the timeout period. The RAPIR also listens to RCM/RCP wall plates, to enable and disable the PIR motion function when not required. Mounting is via a 64mm diameter ceiling cutout, where a plastic collar is fitted. The housing is then pushed into place without the need for fixing screws. This method of installation idealy suits plasterboard or solid ceilings as it avoids the need for rear access to the unit and protects the surrounding finish. 

Brand: Rako
Product Code: RAPIR
Availability: In Stock
Price: £204.00
Ex Tax: £170.00
Rako RAPIR Motion detector

Dimensions - 68.5x76mm (64mm ceiling cut-out)

Input supply - 230V AC +/-10% 50Hz

Weight - 125g

Housing - Flame retardant ABS, fixing clip
polypropylene

Type - Class 2

Climate range - Temperature +2C to +40C
Humidity +5% to 95% non condensing

Connections - 2 way screw terminal for power
supply

Terminal sizes - 2.5mm²

Standards - Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001

Communication - Rakom coded fm radio, 433.9MHz

Memory - Flash memory (non volatile)

A ceiling mount PIR motion detector with a 360o sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required. 

MOVEMENT CONTROL

The RAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with a timeout of 5 minutes. When configured with the RASOFT programming software, it is possible to select which scene is activated and modify the timeout period. The RAPIR also listens to RCM/RCP wall plates, to enable and disable the PIR motion function when not required. Mounting is via a 64mm diameter ceiling cutout, where a plastic collar is fitted. The housing is then pushed into place without the need for fixing screws. This method of installation idealy suits plasterboard or solid ceilings as it avoids the need for rear access to the unit and protects the surrounding finish. 


Related Products

Tags: RA
  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP