Categories
Rako Approved Installers Sonos Authorised Reseller Golden Ear Need Help? Review Centre
RB Vision
  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 10. GoldenEar
  • 07. WyreStorm
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP

Rako RMT500 (RDT500) Trailing Edge Dimmer Module

A compact 500W RF dimmer designed to fit through a standard down-light cut-out. Trailing edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 LED down-lights. The dimmer is connected in-line before the first lighting fitting to enable dimming of up to 500W of trailing edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates. 

 

IN CONTROL Designed to fit in a ceiling void or cupboard, the RMT500 trailing edge dimmer can control up to 500 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built shortcircuit protection, necessary with this style of lamps. 16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. NOTE – THE RMT500 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMT500 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMT500 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.

Brand: Rako
Product Code: RMT500
Availability: In Stock
Price: £154.80
Ex Tax: £129.00
Rako RMT500 (RDT500) Trailing Edge Dimmer Module

Dimensions - 160x50x36mm

Input - supply 230V AC +/-10% 50Hz

Weight - 125g

Housing - UL VO material

Climate range - Temperature +2C to +40C

Humidity +5% to 95% non condensing

Connections - 3 way screw terminals for mains power

Protection - Auto resetting over current protection

Auto thermal shutdown

Voltage surge protection

Load - types Incandescent mains voltage lamps

Tungsten halogen GU10 lamps

Trailing edge dimmable LV transformers

Trailing edge dimmable cold cathode

Mains Dimmable LEDs

Minimum - load 1w

Maximum - load 500w/450va

Terminal - sizes 1.5mm2 - Stranded

2.5mm2 - Solid

Standards - Emissions - EN61000-6-3 : 2001

Immunity - EN61000-6-1 : 2001

Communication - Rakom coded fm radio, 433.9MHz

Memory - Flash memory (non volatile)

A compact 500W RF dimmer designed to fit through a standard down-light cut-out. Trailing edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 LED down-lights. The dimmer is connected in-line before the first lighting fitting to enable dimming of up to 500W of trailing edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates. 

 

IN CONTROL Designed to fit in a ceiling void or cupboard, the RMT500 trailing edge dimmer can control up to 500 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built shortcircuit protection, necessary with this style of lamps. 16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. NOTE – THE RMT500 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMT500 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMT500 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.

For more information, click the link below:

RMT500 Datasheet

RMT500 Installation Manual


Related Products

  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 10. GoldenEar
  • 07. WyreStorm
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP