Categories
Rako Approved Installers Sonos Authorised Reseller Golden Ear Need Help? Review Centre
RB Vision
  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP

Rako RLED30CV4

A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings. When used with RGBW fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wallpanel or hand held remote. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.

IN CONTROL Designed for use with 3 or 4 channel constant voltage LED fittings and 3 or 4 channel LED tape light with common +ve and individual -ve connections. Maximum wattage of 120w when used as 4 channel or 90w with 3 channel for 12V d.c. fittings or 240w (60w per channel) for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application). Programmed using either an RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED30CV4 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH handhelds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako's application sheet 'Controlling LED Lighting With Rako Dimmers and Modules'.

 

Brand: Rako
Product Code: RLED30CV4
Availability: In Stock
Price: £184.80
Ex Tax: £154.00
Rako RLED30CV4

Dimensions - 172x46x40mm

Input supply - 12 or 24v DC

Weight - 142g

Housing - UL VO ABS

Climate range - Temperature +2C to +40C

Humidity +5% to 95% non condensing

Connections - 2 way screw terminals for 12-24v d.c. supply

6 way screw terminals for load

Standards - Emissions - EN61000-6-3 : 2001

Immunity - EN61000-6-1 : 2001

Communication - Rakom coded fm radio, 433.9MHz

Memory - Flash memory (non volatile)

A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings. When used with RGBW fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wallpanel or hand held remote. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.

IN CONTROL Designed for use with 3 or 4 channel constant voltage LED fittings and 3 or 4 channel LED tape light with common +ve and individual -ve connections. Maximum wattage of 120w when used as 4 channel or 90w with 3 channel for 12V d.c. fittings or 240w (60w per channel) for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application). Programmed using either an RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED30CV4 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH handhelds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako's application sheet 'Controlling LED Lighting With Rako Dimmers and Modules'.

 

  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP